Buderus RC30 Betriebsanleitung PDF herunterladen (Seite 16)

First steps with your RC30

16 Operating instructions RC30 programmable room thermostat • Issue 02/2006

We reserve the right to make any changes due to technical modifications.

Display (Fig. 3, Item 1)

As soon as you press a button or move the dial, the display shows

the selected value (set value). After about 2 seconds the standard

display is restored.

The standard display shows the actual room temperature. This is

the factory setting. You can also choose a different standard

display (see Chapter 8.19 "Changing the standard display",

page 55).

LEDs (Fig. 3, Item 2)

The green LEDs provide information about the current operating

status:

Flap (Fig. 3, Item 5)

To open the flap, take hold of the recessed grip on the left-hand

side and pull the flap towards you. Opening the flap activates a

switch allowing you to use the extended functions and special

functions.

ACTUAL

ROOM TEMP

21.5

LED Operating status

"AUT"

The LED lights up when automatic mode (heating

program) is active. In addition, the "Day mode" or "Night

mode" LED is illuminated.

If the holiday function is active, only the "AUT" button

LED is illuminated.

"Day

mode"

The LED lights up in normal heating mode (day mode).

"Night

mode"

The LED lights up in reduced heating mode (night

mode).

"DHW"

The LED lights up if the DHW temperature falls below

the set value.

The LED is off if the DHW temperature is within the

desired temperature range or if there is no DHW heating

function installed in the EMS.

The LED flashes when hot water is being heated by

means of the "DHW single loading" function.

Tab. 1 Operating status

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Buderus RC30 Betriebsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermostate Buderus RC30